How to use cigar cabinets
When you use it, insert the power first, then press the booting health, then press the unlocking health, and then set the temperature and humidity after the tick sounds, and then humidify it at the bottom. When you reach, you can put a small dish on the top floor, put pure water, and put a sponge, so that the humidity will be faster, because the cabinet is dry and wet, and the cigar frame must be wet to a certain amount of wetness. The amount, so it will absorb moisture. At this time, there is some floating humidity, which is normal.
1. The general humidity of the outlet near the upper part is small, suitable for bulk cigars and recently preparing cigars.
2. The humidity of the lower part of the cigar cabinet is slightly higher, and it is suitable for storing boxes for long -term mellow cigars.
3. Place the cigar box evenly on the frame to weight evenly. Try not to touch the steps of the cabinet, back or bottom of the cabinet, and do not stack the cigar box on the top or bottom.
4. Electronic cigar cabinets are set with air -to -pores, and the temperature difference between inside and outside the cabinet is used, so as not to worry about the “breathing” problem of cigar storage.
Post time: Feb-13-2023
